
New Orleans Concreters builds concrete slabs and foundations for Avondale, a West Bank community in Jefferson Parish. Free estimates, clear pricing in writing, and a crew that compacts the base, cuts the joints and seals the finish the right way.
Flat, square, and to spec
Garage slabs, shed pads, addition and outbuilding foundations, and equipment pads, poured level and square on a compacted base with the reinforcement the job calls for. We also pour basement and warehouse floors.
Built to carry the load
- Compacted base and proper thickness for the use.
- Rebar or wire reinforcement where needed.
- Correct slope and jointing to control cracking.
Concrete work in Avondale
Avondale is unincorporated Jefferson Parish on the West Bank, bordered by Waggaman to the west and Bridge City to the east. It is home to NOLA Motorsports Park, TPC Louisiana and the 500-acre Churchill Technology and Business Park.
What the ground in Avondale means for your slab
Avondale is mapped mostly as Schriever clay, Westwego clay and Harahan clay, with some Cancienne silt loam; the official type location of the Westwego series is in Avondale Subdivision. Westwego clay formed in a drained former swamp whose clay and organic layers shrank irreversibly after drainage, and NRCS rates all three clays very limited for streets because of shrink-swell and low strength. In general, flatwork on soils like these depends on a well-compacted base, grading that sends water away from the slab, and control joints placed to manage cracking.
Permits in Avondale
Jefferson Parish's Building Permits Department (formerly Inspection and Code Enforcement; West Bank office, 1855 Ames Blvd., Marrero, 504-364-3512) lists paving of walkways, driveways and other non-structural paving on private property as exempt from a building permit, though some zoning districts require paving review. Sidewalks, driveway aprons and curb cuts in the parish right-of-way need a permit from the Department of Engineering (504-736-6500). A driveway on a state highway needs a Louisiana DOTD permit.
Why Avondale homeowners choose us
- Built on a real base so it does not crack, heave or settle a year later.
- Sealed for the Gulf Coast climate against heat, heavy rain and shifting soils.
- Honest, itemized pricing, in writing, before we start.
- Local crew that answers the phone and shows up when we say.
Serving Avondale and nearby
We cover Avondale and nearby Metairie, Kenner, Gretna, Harvey, Marrero, plus the rest of the New Orleans area. Wherever you are within about 30 miles of New Orleans, the standard is the same.
Common questions
How thick should a slab be?
It depends on the load. Shed and patio slabs are thinner than garage or equipment pads. We size thickness and reinforcement to the use.
Can you pour a slab for a garage or addition?
Yes, garage slabs, addition foundations, shed pads and outbuilding floors are all standard work for us.
Do I need a permit to replace the driveway apron at the street?
Yes, when the apron is on parish right-of-way. Jefferson Parish requires a driveway permit from the Department of Engineering for any new, replacement or additional driveway apron, and that permit also covers the public sidewalk. Engineering can be reached at 504-736-6500; replacement driveways can also be discussed at 504-349-5174. If the street is a state highway, the permit comes from Louisiana DOTD instead.
What kind of soil is under Avondale?
Mostly clay. USDA maps Avondale largely as Schriever, Westwego and Harahan clays, and the reference site for the Westwego soil series is in Avondale Subdivision. These soils are poorly drained, and NRCS rates them very limited for streets because of shrink-swell and low strength.
