
In Harvey, a busy West Bank community across the river from downtown, New Orleans Concreters handles stained and colored concrete from the base up. We look at drainage and the ground first, then give you a written, itemized estimate before any forms go in.
Color that becomes part of the concrete
Acid stains react with the concrete for a rich, variegated, marbled look no two slabs share. Integral color and dyes give you consistent, controllable tones. We stain new pours and existing slabs, indoors and out.
Options
- Acid stain for a mottled, natural-stone look.
- Integral color mixed through the pour for consistency.
- Dyes & tints for vivid or custom tones.
- Sealed to lock in color and protect the surface.
Concrete work in Harvey
Harvey is unincorporated Jefferson Parish on the West Bank, between Gretna and Marrero, along the Harvey Canal, a shipping route to the Gulf of Mexico. It began as a company town called Cosmopolite City, developed by Joseph Hale Harvey, and was later renamed for the Harvey family.
What the ground in Harvey means for your slab
About half of Harvey is mapped as Westwego clay, a soil of drained former swamp whose upper clay and organic layers dried and shrank irreversibly after artificial drainage, with Cancienne silt loam and Harahan clay making up much of the rest. Westwego clay is poorly drained and very slowly permeable, with a water table 1 to 3 feet down depending on pumping, and NRCS rates it very limited for streets because of shrink-swell, low strength and subsidence. In general, flatwork on soils like these depends on a well-compacted base, grading that sends water away from the slab, and control joints placed to manage cracking.
Permits in Harvey
Jefferson Parish's Building Permits Department (formerly Inspection and Code Enforcement; West Bank office, 1855 Ames Blvd., Marrero, 504-364-3512) lists paving of walkways, driveways and other non-structural paving on private property as exempt from a building permit, though some zoning districts require paving review. Sidewalks, driveway aprons and curb cuts in the parish right-of-way need a permit from the Department of Engineering (504-736-6500). A driveway on a state highway needs a Louisiana DOTD permit.
Why Harvey homeowners choose us
- Built on a real base so it does not crack, heave or settle a year later.
- Sealed for the Gulf Coast climate against heat, heavy rain and shifting soils.
- Honest, itemized pricing, in writing, before we start.
- Local crew that answers the phone and shows up when we say.
Serving Harvey and nearby
We cover Harvey and nearby Metairie, Kenner, Gretna, Marrero, Westwego, plus the rest of the New Orleans area. Wherever you are within about 30 miles of New Orleans, the standard is the same.
Common questions
Can you stain my existing concrete?
Yes, as long as it is clean and sound. Stain works on existing patios, floors and walkways, not just new pours.
Will the color fade?
Sealed properly and resealed on schedule, stained concrete holds its color well. Outdoor surfaces get a UV-stable sealer.
Do I need a permit to replace the driveway apron at the street?
Yes, when the apron is on parish right-of-way. Jefferson Parish requires a driveway permit from the Department of Engineering for any new, replacement or additional driveway apron, and that permit also covers the public sidewalk. Engineering can be reached at 504-736-6500; replacement driveways can also be discussed at 504-349-5174. If the street is a state highway, the permit comes from Louisiana DOTD instead.
What is the soil like under most of Harvey?
USDA maps about half of Harvey as Westwego clay, which formed in clayey alluvium and organic material in a former swamp that shrank irreversibly after drainage. It is poorly drained, holds water 1 to 3 feet down depending on pumping, and is rated very limited for streets by NRCS.
