
Homeowners in River Ridge (Jefferson Parish) call New Orleans Concreters for stained and colored concrete. River Ridge is a quiet residential community in Jefferson Parish, and the work is built for our heavy rain and settling soils, not just for how it looks on day one.
Color that becomes part of the concrete
Acid stains react with the concrete for a rich, variegated, marbled look no two slabs share. Integral color and dyes give you consistent, controllable tones. We stain new pours and existing slabs, indoors and out.
Options
- Acid stain for a mottled, natural-stone look.
- Integral color mixed through the pour for consistency.
- Dyes & tints for vivid or custom tones.
- Sealed to lock in color and protect the surface.
Concrete work in River Ridge
River Ridge is unincorporated Jefferson Parish on the east bank of the Mississippi. The land was developed in the late 18th century for French colonial sugar plantations, and the area was officially named River Ridge in 1974. Parts of River Ridge are just blocks from Kenner's Rivertown historic district.
What the ground in River Ridge means for your slab
River Ridge is mapped mostly as Schriever clay, with Cancienne silt loam on natural levee ground near the river. Schriever is a poorly drained, very slowly permeable clay with very high shrink-swell that NRCS rates very limited for streets, while Cancienne is somewhat poorly drained and rated only somewhat limited, mainly for low strength. In general, flatwork on soils like these depends on a well-compacted base, grading that sends water away from the slab, and control joints placed to manage cracking.
Permits in River Ridge
Jefferson Parish's Building Permits Department (formerly Inspection and Code Enforcement; East Bank office, 1221 Elmwood Park Blvd., 504-736-6957) lists paving of walkways, driveways and other non-structural paving on private property as exempt from a building permit, though some zoning districts require paving review. Sidewalks, driveway aprons and curb cuts in the parish right-of-way need a permit from the Department of Engineering (504-736-6500). A driveway on a state highway needs a Louisiana DOTD permit.
Why River Ridge homeowners choose us
- Built on a real base so it does not crack, heave or settle a year later.
- Sealed for the Gulf Coast climate against heat, heavy rain and shifting soils.
- Honest, itemized pricing, in writing, before we start.
- Local crew that answers the phone and shows up when we say.
Serving River Ridge and nearby
We cover River Ridge and nearby Metairie, Kenner, Gretna, Harvey, Marrero, plus the rest of the New Orleans area. Wherever you are within about 30 miles of New Orleans, the standard is the same.
Common questions
Can you stain my existing concrete?
Yes, as long as it is clean and sound. Stain works on existing patios, floors and walkways, not just new pours.
Will the color fade?
Sealed properly and resealed on schedule, stained concrete holds its color well. Outdoor surfaces get a UV-stable sealer.
Do I need a permit to replace the driveway apron at the street?
Yes, when the apron is on parish right-of-way. Jefferson Parish requires a driveway permit from the Department of Engineering for any new, replacement or additional driveway apron, and that permit also covers the public sidewalk. Engineering can be reached at 504-736-6500; replacement driveways can also be discussed at 504-349-5174. If the street is a state highway, the permit comes from Louisiana DOTD instead.
Do I need a building permit for a new driveway on my River Ridge property?
Jefferson Parish lists driveways and other non-structural paving on private property as exempt from a building permit, unless the Code Official finds a hazardous or complex condition, and some zoning districts require paving review. The apron and sidewalk in the parish right-of-way do need a Department of Engineering permit (504-736-6500).
