Free Estimates · Honest Pricing · Serving New Orleans & 35+ Nearby Suburbs
Home  /  Service Areas  /  Elmwood  /  Concrete Driveways
Concrete Driveway · Elmwood, Louisiana

Concrete Driveways in Elmwood, LA, new concrete driveways and driveway replacements, done right.

New Orleans Concreters provides new concrete driveways and driveway replacements for homeowners in Elmwood, Jefferson Parish. Free, honest estimates and concrete built to last through the Gulf Coast climate.

Family-Owned & Operated4.9★ · 24 Google ReviewsA+ BBB RatedFree, Itemized EstimatesCommercial & Residential
Concrete Driveways in Elmwood, Louisiana by New Orleans Concreters

New Orleans Concreters builds new concrete driveways and driveway replacements for Elmwood, a commercial and residential district in Jefferson Parish. Free estimates, clear pricing in writing, and a crew that compacts the base, cuts the joints and seals the finish the right way.

New driveways & full replacements

Whether you are replacing a cracked, heaving driveway or pouring new, we build it to carry real vehicle loads: a compacted base, the right slab thickness and rebar or wire reinforcement where it counts, with proper slope so water runs off instead of pooling.

Finishes & options

  • Broom finish for a durable, classic driveway.
  • Stamped or bordered for curb appeal that matches a stamped patio or walkway.
  • Exposed aggregate for grip and a high-end look.
  • Proper drainage and expansion joints so the slab moves without cracking.

Built for the Gulf Coast climate

An properly proportioned mix, correct jointing and a good sealer keep your driveway intact through heat, heavy rain and shifting soils. We will tell you honestly whether a repair or a full replacement is the smarter spend.

Concrete work in Elmwood

Elmwood is unincorporated Jefferson Parish on the east bank, best known for the Elmwood Business District, a 1,700-acre planned development with office, retail, industrial and multifamily uses near Clearview Parkway and Jefferson Highway. Jefferson Parish's east bank Building Permits and Engineering offices are in the Joseph S. Yenni Building on Elmwood Park Boulevard.

What the ground in Elmwood means for your slab

Elmwood is mapped mostly as Cancienne silty clay loam and Schriever clay, with some Harahan clay. Cancienne is a somewhat poorly drained natural levee soil with a saturated zone 1.5 to 4 feet down from December through April, rated only somewhat limited for streets; Schriever and Harahan are poorly drained clays with very high shrink-swell, rated very limited. In general, flatwork on soils like these depends on a well-compacted base, grading that sends water away from the slab, and control joints placed to manage cracking.

Permits in Elmwood

Jefferson Parish's Building Permits Department (formerly Inspection and Code Enforcement; East Bank office, 1221 Elmwood Park Blvd., 504-736-6957) lists paving of walkways, driveways and other non-structural paving on private property as exempt from a building permit, though some zoning districts require paving review. Sidewalks, driveway aprons and curb cuts in the parish right-of-way need a permit from the Department of Engineering (504-736-6500). A driveway on a state highway needs a Louisiana DOTD permit.

Planning a project in Elmwood? Call (985) 296-6206 for a free, no-pressure estimate, or see our full concrete driveways details.

Why Elmwood homeowners choose us

  • Built on a real base so it does not crack, heave or settle a year later.
  • Sealed for the Gulf Coast climate against heat, heavy rain and shifting soils.
  • Honest, itemized pricing, in writing, before we start.
  • Local crew that answers the phone and shows up when we say.

Serving Elmwood and nearby

We cover Elmwood and nearby Metairie, Kenner, Gretna, Harvey, Marrero, plus the rest of the New Orleans area. Wherever you are within about 30 miles of New Orleans, the standard is the same.

Common questions

How much does a concrete driveway cost?

Driveway cost depends on square footage, thickness, reinforcement, tear-out of the old slab, and finish. We give a clear, itemized estimate for free so there are no surprises.

How thick should a concrete driveway be?

Four inches is standard for cars; we go thicker where trucks, RVs or heavy loads are involved, with reinforcement to match.

Can you replace just part of my driveway?

Often yes. If only a section has failed we can replace that area; if the base is gone underneath the whole thing, a full replacement is the better value. We will tell you straight.

Do I need a permit to replace the driveway apron at the street?

Yes, when the apron is on parish right-of-way. Jefferson Parish requires a driveway permit from the Department of Engineering for any new, replacement or additional driveway apron, and that permit also covers the public sidewalk. Engineering can be reached at 504-736-6500; replacement driveways can also be discussed at 504-349-5174. If the street is a state highway, the permit comes from Louisiana DOTD instead.

Where is the Jefferson Parish permit office for Elmwood?

The east bank Building Permits office is in the Joseph S. Yenni Building, 1221 Elmwood Park Blvd., Suite 101 (504-736-6957), and the Department of Engineering, which handles driveway aprons and sidewalks in the right-of-way, is in Suite 802 (504-736-6500).

Reviews

Rated 4.9 stars on Google

4.9★★★★★

Ready for a free estimate?

Honest pricing, no pressure, and a crew that shows up. Serving Elmwood and the wider New Orleans area.

(985) 296-6206

Request a Free Estimate
Tap to Call · Free Estimate