
Homeowners in Elmwood (Jefferson Parish) call New Orleans Concreters for concrete pool decks. Elmwood is a commercial and residential district in Jefferson Parish, and the work is built for our heavy rain and settling soils, not just for how it looks on day one.
A deck that is safe and looks the part
Pool decks have a different job than a patio: they need to drain away from the pool, stay slip-resistant when wet, and not bake your feet in July. We pour textured, decorative decks that handle all three.
Finishes for pool decks
- Textured stamped for grip plus a stone or wood look.
- Broom or exposed aggregate for traction and durability.
- Lighter colors that stay cooler underfoot in summer.
- Proper slope so water runs away from the pool, not into it.
Sealed for chlorine, sun and salt
We seal pool decks to stand up to pool chemicals, UV and moisture, and we joint them correctly so they hold up through soil movement and heavy rain.
Concrete work in Elmwood
Elmwood is unincorporated Jefferson Parish on the east bank, best known for the Elmwood Business District, a 1,700-acre planned development with office, retail, industrial and multifamily uses near Clearview Parkway and Jefferson Highway. Jefferson Parish's east bank Building Permits and Engineering offices are in the Joseph S. Yenni Building on Elmwood Park Boulevard.
What the ground in Elmwood means for your slab
Elmwood is mapped mostly as Cancienne silty clay loam and Schriever clay, with some Harahan clay. Cancienne is a somewhat poorly drained natural levee soil with a saturated zone 1.5 to 4 feet down from December through April, rated only somewhat limited for streets; Schriever and Harahan are poorly drained clays with very high shrink-swell, rated very limited. In general, flatwork on soils like these depends on a well-compacted base, grading that sends water away from the slab, and control joints placed to manage cracking.
Permits in Elmwood
Jefferson Parish's Building Permits Department (formerly Inspection and Code Enforcement; East Bank office, 1221 Elmwood Park Blvd., 504-736-6957) lists paving of walkways, driveways and other non-structural paving on private property as exempt from a building permit, though some zoning districts require paving review. Sidewalks, driveway aprons and curb cuts in the parish right-of-way need a permit from the Department of Engineering (504-736-6500). A driveway on a state highway needs a Louisiana DOTD permit.
Why Elmwood homeowners choose us
- Built on a real base so it does not crack, heave or settle a year later.
- Sealed for the Gulf Coast climate against heat, heavy rain and shifting soils.
- Honest, itemized pricing, in writing, before we start.
- Local crew that answers the phone and shows up when we say.
Serving Elmwood and nearby
We cover Elmwood and nearby Metairie, Kenner, Gretna, Harvey, Marrero, plus the rest of the New Orleans area. Wherever you are within about 30 miles of New Orleans, the standard is the same.
Common questions
Is stamped concrete slippery around a pool?
Not when it is finished and sealed for traction. We use textured stamps and slip-resistant sealers specifically for pool decks.
Can you pour a deck around an existing pool?
Yes. We work around existing in-ground pools and tie the new deck into the coping cleanly.
Do I need a permit to replace the driveway apron at the street?
Yes, when the apron is on parish right-of-way. Jefferson Parish requires a driveway permit from the Department of Engineering for any new, replacement or additional driveway apron, and that permit also covers the public sidewalk. Engineering can be reached at 504-736-6500; replacement driveways can also be discussed at 504-349-5174. If the street is a state highway, the permit comes from Louisiana DOTD instead.
Where is the Jefferson Parish permit office for Elmwood?
The east bank Building Permits office is in the Joseph S. Yenni Building, 1221 Elmwood Park Blvd., Suite 101 (504-736-6957), and the Department of Engineering, which handles driveway aprons and sidewalks in the right-of-way, is in Suite 802 (504-736-6500).
