
New Orleans Concreters builds concrete walkways and sidewalks for Elmwood, a commercial and residential district in Jefferson Parish. Free estimates, clear pricing in writing, and a crew that compacts the base, cuts the joints and seals the finish the right way.
Paths that look good and stay safe
A good walkway is level, properly sloped for drainage, and free of the trip-edges that come from heaving or settling. We pour front walks, side paths, garden paths and public sidewalks to match your patio or driveway.
Finishes
- Broom finish for grip and a clean classic look.
- Stamped or stained to match a decorative patio or entry.
- Exposed aggregate for traction in all weather.
Built to stay level
Most walkway failures are base failures. We compact the base, pour to thickness, and joint correctly so the path stays flat and safe through Louisiana's heat, humidity and shifting soils cycles.
Concrete work in Elmwood
Elmwood is unincorporated Jefferson Parish on the east bank, best known for the Elmwood Business District, a 1,700-acre planned development with office, retail, industrial and multifamily uses near Clearview Parkway and Jefferson Highway. Jefferson Parish's east bank Building Permits and Engineering offices are in the Joseph S. Yenni Building on Elmwood Park Boulevard.
What the ground in Elmwood means for your slab
Elmwood is mapped mostly as Cancienne silty clay loam and Schriever clay, with some Harahan clay. Cancienne is a somewhat poorly drained natural levee soil with a saturated zone 1.5 to 4 feet down from December through April, rated only somewhat limited for streets; Schriever and Harahan are poorly drained clays with very high shrink-swell, rated very limited. In general, flatwork on soils like these depends on a well-compacted base, grading that sends water away from the slab, and control joints placed to manage cracking.
Permits in Elmwood
Jefferson Parish's Building Permits Department (formerly Inspection and Code Enforcement; East Bank office, 1221 Elmwood Park Blvd., 504-736-6957) lists paving of walkways, driveways and other non-structural paving on private property as exempt from a building permit, though some zoning districts require paving review. Sidewalks, driveway aprons and curb cuts in the parish right-of-way need a permit from the Department of Engineering (504-736-6500). A driveway on a state highway needs a Louisiana DOTD permit.
Why Elmwood homeowners choose us
- Built on a real base so it does not crack, heave or settle a year later.
- Sealed for the Gulf Coast climate against heat, heavy rain and shifting soils.
- Honest, itemized pricing, in writing, before we start.
- Local crew that answers the phone and shows up when we say.
Serving Elmwood and nearby
We cover Elmwood and nearby Metairie, Kenner, Gretna, Harvey, Marrero, plus the rest of the New Orleans area. Wherever you are within about 30 miles of New Orleans, the standard is the same.
Common questions
Do you repair or replace uneven sidewalks?
Both. Minor settling can sometimes be addressed; badly heaved or cracked sections are usually best replaced so the trip hazard is gone for good.
Can a walkway match my patio?
Yes. We carry the same stamp pattern, color and border across walkways, patios and entries for a cohesive look.
Do I need a permit to replace the driveway apron at the street?
Yes, when the apron is on parish right-of-way. Jefferson Parish requires a driveway permit from the Department of Engineering for any new, replacement or additional driveway apron, and that permit also covers the public sidewalk. Engineering can be reached at 504-736-6500; replacement driveways can also be discussed at 504-349-5174. If the street is a state highway, the permit comes from Louisiana DOTD instead.
Where is the Jefferson Parish permit office for Elmwood?
The east bank Building Permits office is in the Joseph S. Yenni Building, 1221 Elmwood Park Blvd., Suite 101 (504-736-6957), and the Department of Engineering, which handles driveway aprons and sidewalks in the right-of-way, is in Suite 802 (504-736-6500).
