
In Elmwood, a commercial and residential district in Jefferson Parish, New Orleans Concreters handles stained and colored concrete from the base up. We look at drainage and the ground first, then give you a written, itemized estimate before any forms go in.
Color that becomes part of the concrete
Acid stains react with the concrete for a rich, variegated, marbled look no two slabs share. Integral color and dyes give you consistent, controllable tones. We stain new pours and existing slabs, indoors and out.
Options
- Acid stain for a mottled, natural-stone look.
- Integral color mixed through the pour for consistency.
- Dyes & tints for vivid or custom tones.
- Sealed to lock in color and protect the surface.
Concrete work in Elmwood
Elmwood is unincorporated Jefferson Parish on the east bank, best known for the Elmwood Business District, a 1,700-acre planned development with office, retail, industrial and multifamily uses near Clearview Parkway and Jefferson Highway. Jefferson Parish's east bank Building Permits and Engineering offices are in the Joseph S. Yenni Building on Elmwood Park Boulevard.
What the ground in Elmwood means for your slab
Elmwood is mapped mostly as Cancienne silty clay loam and Schriever clay, with some Harahan clay. Cancienne is a somewhat poorly drained natural levee soil with a saturated zone 1.5 to 4 feet down from December through April, rated only somewhat limited for streets; Schriever and Harahan are poorly drained clays with very high shrink-swell, rated very limited. In general, flatwork on soils like these depends on a well-compacted base, grading that sends water away from the slab, and control joints placed to manage cracking.
Permits in Elmwood
Jefferson Parish's Building Permits Department (formerly Inspection and Code Enforcement; East Bank office, 1221 Elmwood Park Blvd., 504-736-6957) lists paving of walkways, driveways and other non-structural paving on private property as exempt from a building permit, though some zoning districts require paving review. Sidewalks, driveway aprons and curb cuts in the parish right-of-way need a permit from the Department of Engineering (504-736-6500). A driveway on a state highway needs a Louisiana DOTD permit.
Why Elmwood homeowners choose us
- Built on a real base so it does not crack, heave or settle a year later.
- Sealed for the Gulf Coast climate against heat, heavy rain and shifting soils.
- Honest, itemized pricing, in writing, before we start.
- Local crew that answers the phone and shows up when we say.
Serving Elmwood and nearby
We cover Elmwood and nearby Metairie, Kenner, Gretna, Harvey, Marrero, plus the rest of the New Orleans area. Wherever you are within about 30 miles of New Orleans, the standard is the same.
Common questions
Can you stain my existing concrete?
Yes, as long as it is clean and sound. Stain works on existing patios, floors and walkways, not just new pours.
Will the color fade?
Sealed properly and resealed on schedule, stained concrete holds its color well. Outdoor surfaces get a UV-stable sealer.
Do I need a permit to replace the driveway apron at the street?
Yes, when the apron is on parish right-of-way. Jefferson Parish requires a driveway permit from the Department of Engineering for any new, replacement or additional driveway apron, and that permit also covers the public sidewalk. Engineering can be reached at 504-736-6500; replacement driveways can also be discussed at 504-349-5174. If the street is a state highway, the permit comes from Louisiana DOTD instead.
Where is the Jefferson Parish permit office for Elmwood?
The east bank Building Permits office is in the Joseph S. Yenni Building, 1221 Elmwood Park Blvd., Suite 101 (504-736-6957), and the Department of Engineering, which handles driveway aprons and sidewalks in the right-of-way, is in Suite 802 (504-736-6500).
