
New Orleans Concreters pours stamped concrete patios, walkways and driveways across Elmwood, a commercial and residential district in Jefferson Parish. You get a local crew, honest itemized pricing, and concrete prepped, jointed and sealed to hold up through southeast Louisiana's heat, humidity and soft ground.
Why homeowners choose stamped concrete
Stamped concrete gives you the look of natural stone, brick, slate or wood pavers in a single, solid pour, at a fraction of the cost and with none of the weeds and shifting that come with pavers. You get the pattern and color cast right into the surface, so it holds up for decades.
Patterns & colors
- Patterns: ashlar slate, random stone, herringbone and running-bond brick, wood plank, cobblestone.
- Color: integral color in the mix plus a contrasting release for depth, or acid stain for a richer, mottled finish.
- Borders & bands: a contrasting border or soldier course frames patios and driveways and hides the edge form line.
Built for Louisiana's heat, humidity and shifting soils
Central the Gulf Coast climate are hard on flatwork. We pour an properly proportioned mix on a properly compacted base, cut clean control joints to direct where the slab moves, and finish with a quality sealer. Reseal every two to three years and stamped concrete stays sharp against heat, heavy rain and shifting soils for the long haul.
Concrete work in Elmwood
Elmwood is unincorporated Jefferson Parish on the east bank, best known for the Elmwood Business District, a 1,700-acre planned development with office, retail, industrial and multifamily uses near Clearview Parkway and Jefferson Highway. Jefferson Parish's east bank Building Permits and Engineering offices are in the Joseph S. Yenni Building on Elmwood Park Boulevard.
What the ground in Elmwood means for your slab
Elmwood is mapped mostly as Cancienne silty clay loam and Schriever clay, with some Harahan clay. Cancienne is a somewhat poorly drained natural levee soil with a saturated zone 1.5 to 4 feet down from December through April, rated only somewhat limited for streets; Schriever and Harahan are poorly drained clays with very high shrink-swell, rated very limited. In general, flatwork on soils like these depends on a well-compacted base, grading that sends water away from the slab, and control joints placed to manage cracking.
Permits in Elmwood
Jefferson Parish's Building Permits Department (formerly Inspection and Code Enforcement; East Bank office, 1221 Elmwood Park Blvd., 504-736-6957) lists paving of walkways, driveways and other non-structural paving on private property as exempt from a building permit, though some zoning districts require paving review. Sidewalks, driveway aprons and curb cuts in the parish right-of-way need a permit from the Department of Engineering (504-736-6500). A driveway on a state highway needs a Louisiana DOTD permit.
Why Elmwood homeowners choose us
- Built on a real base so it does not crack, heave or settle a year later.
- Sealed for the Gulf Coast climate against heat, heavy rain and shifting soils.
- Honest, itemized pricing, in writing, before we start.
- Local crew that answers the phone and shows up when we say.
Serving Elmwood and nearby
We cover Elmwood and nearby Metairie, Kenner, Gretna, Harvey, Marrero, plus the rest of the New Orleans area. Wherever you are within about 30 miles of New Orleans, the standard is the same.
Common questions
How much does stamped concrete cost in New Orleans?
Stamped concrete runs more than a plain broom-finish slab but well under pavers or natural stone, because the pattern and color go in during the pour. Final price depends on square footage, the number of patterns and colors, site prep and access. We give a clear, itemized estimate for free.
Does stamped concrete crack?
All concrete has control joints that direct where it cracks. Poured on a solid base with the right joint spacing, mix and sealer, stamped concrete holds up beautifully through the Gulf Coast climate.
How do I maintain a stamped concrete patio?
Rinse it as needed, reseal every two to three years, and avoid standing water and ponding while it cures. That is essentially the whole maintenance routine.
Do I need a permit to replace the driveway apron at the street?
Yes, when the apron is on parish right-of-way. Jefferson Parish requires a driveway permit from the Department of Engineering for any new, replacement or additional driveway apron, and that permit also covers the public sidewalk. Engineering can be reached at 504-736-6500; replacement driveways can also be discussed at 504-349-5174. If the street is a state highway, the permit comes from Louisiana DOTD instead.
Where is the Jefferson Parish permit office for Elmwood?
The east bank Building Permits office is in the Joseph S. Yenni Building, 1221 Elmwood Park Blvd., Suite 101 (504-736-6957), and the Department of Engineering, which handles driveway aprons and sidewalks in the right-of-way, is in Suite 802 (504-736-6500).
