
In Elmwood, a commercial and residential district in Jefferson Parish, New Orleans Concreters handles custom concrete patios from the base up. We look at drainage and the ground first, then give you a written, itemized estimate before any forms go in.
A patio built around how you actually use it
We size and shape the patio around real life: room for the table and chairs, a clear path to the grill, and space to walk around the furniture without stepping in the grass. Stamped, broom-finished, exposed aggregate or colored, the finish is your call.
Patio finishes we pour
- Stamped & colored for a stone or brick look.
- Broom finish for a clean, classic, budget-friendly surface.
- Exposed aggregate for great grip and timeless texture.
- Borders and bands to frame the space and add detail.
Done right, the first time
A patio is only as good as what is under it. We prep and compact the base, pour to the right thickness, place control joints correctly, and seal the surface so your patio does not heave, crack or fade a year later.
Concrete work in Elmwood
Elmwood is unincorporated Jefferson Parish on the east bank, best known for the Elmwood Business District, a 1,700-acre planned development with office, retail, industrial and multifamily uses near Clearview Parkway and Jefferson Highway. Jefferson Parish's east bank Building Permits and Engineering offices are in the Joseph S. Yenni Building on Elmwood Park Boulevard.
What the ground in Elmwood means for your slab
Elmwood is mapped mostly as Cancienne silty clay loam and Schriever clay, with some Harahan clay. Cancienne is a somewhat poorly drained natural levee soil with a saturated zone 1.5 to 4 feet down from December through April, rated only somewhat limited for streets; Schriever and Harahan are poorly drained clays with very high shrink-swell, rated very limited. In general, flatwork on soils like these depends on a well-compacted base, grading that sends water away from the slab, and control joints placed to manage cracking.
Permits in Elmwood
Jefferson Parish's Building Permits Department (formerly Inspection and Code Enforcement; East Bank office, 1221 Elmwood Park Blvd., 504-736-6957) lists paving of walkways, driveways and other non-structural paving on private property as exempt from a building permit, though some zoning districts require paving review. Sidewalks, driveway aprons and curb cuts in the parish right-of-way need a permit from the Department of Engineering (504-736-6500). A driveway on a state highway needs a Louisiana DOTD permit.
Why Elmwood homeowners choose us
- Built on a real base so it does not crack, heave or settle a year later.
- Sealed for the Gulf Coast climate against heat, heavy rain and shifting soils.
- Honest, itemized pricing, in writing, before we start.
- Local crew that answers the phone and shows up when we say.
Serving Elmwood and nearby
We cover Elmwood and nearby Metairie, Kenner, Gretna, Harvey, Marrero, plus the rest of the New Orleans area. Wherever you are within about 30 miles of New Orleans, the standard is the same.
Common questions
How much does a concrete patio cost?
It depends on size, finish and site prep. A plain broom-finish patio is the most affordable; stamped and decorative finishes cost more for the upgraded look. Every estimate is free and itemized.
How big should my patio be?
For a table and chairs plus walking room, most homeowners are happiest around 12x12 or larger. We help you size it on-site to fit your furniture and yard.
How long does a patio take?
Most residential patios are poured in a day once prep is done, then cured and sealed over the following days.
Do I need a permit to replace the driveway apron at the street?
Yes, when the apron is on parish right-of-way. Jefferson Parish requires a driveway permit from the Department of Engineering for any new, replacement or additional driveway apron, and that permit also covers the public sidewalk. Engineering can be reached at 504-736-6500; replacement driveways can also be discussed at 504-349-5174. If the street is a state highway, the permit comes from Louisiana DOTD instead.
Where is the Jefferson Parish permit office for Elmwood?
The east bank Building Permits office is in the Joseph S. Yenni Building, 1221 Elmwood Park Blvd., Suite 101 (504-736-6957), and the Department of Engineering, which handles driveway aprons and sidewalks in the right-of-way, is in Suite 802 (504-736-6500).
